Low Noise Laser Diode Driver ATLS500MA104

ATLS500MA104 is a low noise laser diode driver that is designed for driving laser diodes with low noise current of 500mA. The noise is low, 3.96μVP-P at the frequency of 0.1Hz to 10Hz.

The output current of this laser driver can be modulated by an external signal of up to 100 KHz, or set by an input voltage linearly, which results in a minimum 100nS rise and fall times at the output current. When LIS equals to 1V DC plus 200mV AC, the output current is modulated between 200mA to 210mA. The output current and the output current settings can be set separately. The internal temperature of this laser driver can be monitored, once the temperature exceeds 120°C, the laser driver will shut down by itself for avoiding being damaged by over heat. The power supply voltage ranges from 4.75V to 5.75V. There is also a compensation network which keeps the output current to be the same even when the temperature rises.

For more technical data of this laser driver, please visit our website at:

http://www.analogtechnologies.com/ATLS_XXX_104.html

For more types of laser drivers, please visit us at:

http://www.analogtechnologies.com/laserdriver.html

Various electronic products can be found here:

http://www.analogtechnologies.com/