ATE1-288 series peltier coolers / TEC modules come with 288 pairs of Peltier elements inside. This series TEC modules have the maximum Peltier elements and the input voltage of 35V. The maximum current can be 6A, 7A, 8A, 9A, 10A, and 20A. The temperature difference between the two ceramic plates is 68°C. If a higher temperature difference is needed, then users can utilize two stage TECs or three stage TECs.
TEC modules are vulnerable to shocking tangent forces, which can crack the Peltier elements inside the TEC module. The crack caused by tangent forces will grow with time, resulting in increases of TEC resistance and finally stopping operating. Therefore, for all TEC modules, tangent forces should be avoided when using TEC modules. All ATE1-288 series TEC modules are sealed version, which have the edges between the two plates sealed. Sealed TEC modules can prevent moisture from getting into the Peltier elements, which can help achieve long service life and high stability.
Peltier modules can work with heat sink, TEC controller and thermistors to form different temperature control systems.
For technical data and more types of Peltier modules, please refer to:
For more and various types of electronic products, please visit our homepage at:
没有评论:
发表评论