ATFC106D Digital TEC Controller with Fan

ATFC106D digital TEC controller assembly is the updated version of the old ATFC105D, which has stopped production now. As shown in the photo below, there is a LED display and a panel for operation. In this panel, you can set different parameters and monitor different status by the LED indication.

This controller assembly consists of a digital display, a TEC controller, a fan controller, and temperature controlled relay control output. It's recommended to use this TEC controller assembly with heat sinks and fans in an enclosed chamber that needs temperature control. This assembly has a high efficiency, over 98%. The output power is also high, 12V and 20A. There is a internal protection circuit which prevents the assembly from over current. There are two control loops in the controller, one is TEC, and the other is fan. The TEC control loop has a bi-directional output in order to achieve both heating and cooling effects, and the fan control loop switches the fan on and off.

This TEC controller assembly can work with our fan and heat sink to regulate an enclosed chamber temperature by driving a TEC array and a fan array.

For more technical data of this TEC controller, please visit our website at:

http://www.analogtechnologies.com/TEC_Controller_ATFC106D.html

For more types of Peltier controllers, please visit us at:

http://www.analogtechnologies.com/tec-controller.html

TEC5V4A-D Peltier Controller TEC Controller

TEC module is also called thermoelectric cooler or Peltier cooler, which can generate heating or cooling thermal power when an electric DC current is applied at different directions. Current direction determines heating and cooling. There are two ceramic plates on both sides of TEC module, and when the current flows in one direction, one plate is heated up while the other one is cooled down. When the current direction reverses, the two plates will reverse thermal polarity accordingly. TEC modules can be used to keep diode laser working at a constant temperature. TEC controller TEC5V4A-D is designed and used to drive TEC modules.

This TEC controller has the following features: high efficiency is more than 90%; there is an actual object temperature monitoring function; the stability is high, 0.01°C. The maximum output current is 4A, and the maximum output voltage is VPS − 0.2V. The TEC controller is packaged in a metal case to block EMI.

This Peltier controller can work efficiently and stably with our Peltier module, thermistor, and heat sink, to form a temperature control system.

For more technical data of this TEC controller, please visit our website at:

http://www.analogtechnologies.com/TEC5V4A-D.html

For more types of Peltier controllers, please visit us at:

http://www.analogtechnologies.com/TEC5V6A-D.html

http://www.analogtechnologies.com/tec-controller.html

TEC5V6A-D Peltier Controller TEC Controller

TEC controller TEC5V6A-D is designed to drive thermoelectric cooler, which is also called TEC module or Peltier cooler. TEC module can heat up or cool down target objects by applying currents of different direction, and has been widely used in temperature related applications.

As the controller to TEC modules, TEC controller should has high efficiency and high stability. TEC5V6A-D is a good option. The maximum output current of this TEC controller is 6A, and the maximum output voltage is power supply voltage minus 0.3V. This TEC controller comes with a low noise high stability voltage reference of 3.0V, that can be used to set the designed temperature by using a POT or DAC. This controller has a metal case outside the internal components and has a compact size, 25.4*19.9*4.5mm. There are two packaging version, DIP through hole package and SMT surface mount package for different applications.

This Peltier controller can work efficiently and stably with our Peltier module, thermistor, and heat sink, to form a temperature control system.

For more technical data of this TEC controller, please visit our website at:

http://www.analogtechnologies.com/TEC5V6A-D.html

For more types of Peltier controllers, please visit us at:

http://www.analogtechnologies.com/TEC5V4A-D.html

http://www.analogtechnologies.com/tec-controller.html

TECA1-xV-xV-DAH Peltier Controller TEC Controller

TECA1-xV-xV-DAH.html' target='_blank'>TECA1-xV-xV-DAH TEC controller is designed and applied for driving Peltier coolers with high stability. This TEC controller is the updated version of TECA1-xV-xV-D, since it has a higher precision.

The most important feature of this TEC controller is that the maximum voltage difference between the TEMP pin and TEMPSP pin is ≤0.5, while for TECA1-xV-xV-D, this maximum voltage difference is ≤25, 500 times higher than the former one. Besides this, other features of this TEC controller are similar to TECA1-xV-xV-D. This controller has a high efficiency, ≥90%. The maximum output current is 2.5A and the input voltage can be from 3.1V to 3.5V, or 4.75V to 5.25V, specifically, 3.3V or 5V. The TEC controller has a wide operating temperature range, from -40°C to 85°C. Regarding compensation network, there are two version, one has an internal compensation network and the other one doesn't have it.

This Peltier controller can work efficiently and stably with our Peltier module, thermistor, and heat sink, to form a temperature control system.

For more technical data of this TEC controller, please visit our website at:

http://www.analogtechnologies.com/TECA1-xV-xV-DAH.html

For more types of Peltier controllers, please visit us at:

http://www.analogtechnologies.com/TECA1-XV-XV-D.html

http://www.analogtechnologies.com/tec-controller.html

ATTP1A Temperature Plate Assembly

TEC controller can also be called Peltier controller, since it is used to driving Peltier modules, which is also called TEC modules. TECA1-xV-xV-D has high efficiency, more than 90%, and high stability, 0.01°C. This TEC controller has a compact size, which saves valuable spaces for systems.

This TEC controller comes with multiple interface ports for users to set the desired object temperature, the maximum output voltage across TEC, and the compensation network. The compensation network is used to stabilize temperature control loop by compensating high order thermal load. The maximum output voltage is from 0V to VPS − 0.2V, in which VPS is the input voltage. The input voltage can be from 3.1V to 3.5V or from 4.75V to 5.25V.

Moreover, we have developed an updated version of this Peltier controller, TECA1-xV-xV-DAH, which has a higher precision than TECA1-xV-xV-D. In detail, for TECA1-xV-xV-DAH, the maximum voltage difference between TEMP and TEMPSP is less than 0.5, while TECA1-xV-xV-D is ≤25 for this parameter.

This Peltier controller can work with our Peltier module, thermistor, and heat sink, to form a temperature control system.

For more technical data of this TEC controller, please visit our website at:

http://www.analogtechnologies.com/TECA1-XV-XV-D.html

For more types of Peltier controllers, please visit us at:

http://www.analogtechnologies.com/tec-controller.html

ATTP1A Temperature Plate Assembly

ATTP1A is a temperature plate assembly, which can be also called cold plate. This assembly includes a TEC module, a TEC controller, an evaluation board of TEC controller, a fan, a heat sink and a thermistor. This temperature plate assembly is designed and used to evaluate TEC controller, TEC module or heat sinks. It can also be used to stabilize the temperature of the target objects for scientific experiments.

As shown in the photo below, on the left side of the cold plate, there is a TEC controller on the evaluation board, and on the right side of the cold plate, it connects a TEC modules, a thermistor, a fan and a heat sink.

The temperature plate assembly is intended to automatically adjust the temperature parameters based on the required temperature range, by which the TEC controller can detect the pre-set temperature range. This assembly provides a platform with a wide temperature regulation range, from −20°C to 110°C. The thermal load capability is high, 15.75W. This assembly comes with precise temperature stability, 1.8mV.

For more technical data of this temperature plate assembly, please visit our website at:

http://www.analogtechnologies.com/ATTP1A.html

For more types of TEC controllers, please visit us at:

http://www.analogtechnologies.com/tec-controller.html

Various electronic products can be found here:

http://www.analogtechnologies.com

Evaluation Board TECEV104 for TECA1XVXVD

TECEV104 TEC controller evaluation board is a replacement for the evaluation board TECEV103, which is not recommended for new design. TECEV104 evaluation board is applied to evaluate TECA1-5V-5V-D TEC controller, which can drive TEC modules with up to 2A current efficiently. Since no compensation network is integrated in the TECA1-5V-5V-D TEC controller, this evaluation board is used for tuning the TEC controller's external compensation network in order to match the characteristics of users’ thermal load.

The main functions of this TEC controller evaluation board is to set maximum output voltage and set-point temperature, monitor output voltage and actual thermal load temperature, and tune the compensation network so as to match thermal load. There are LEDs that display the TEC controller's temperature status. Moreover, there are some connection pads for connecting with external components or devices.

This TEC controller evaluation board can only evaluate TEC controller of DIP package.

For more technical data of this TEC controller evaluation board, please visit:

http://www.analogtechnologies.com/Evaluation_Board_TECEV104.html

It's recommended to read the datasheet of TECA1-5V-5V-D TEC controller for more detailed application information. Please visit:

http://www.analogtechnologies.com/TECA1-XV-XV-D.html

For more types of TEC controllers and evaluation board, please visit us at:

http://www.analogtechnologies.com/tec-controller.html

Peltier Cooler ATE1-288 Series

ATE1-288 series peltier coolers / TEC modules come with 288 pairs of Peltier elements inside. This series TEC modules have the maximum Peltier elements and the input voltage of 35V. The maximum current can be 6A, 7A, 8A, 9A, 10A, and 20A. The temperature difference between the two ceramic plates is 68°C. If a higher temperature difference is needed, then users can utilize two stage TECs or three stage TECs.

TEC modules are vulnerable to shocking tangent forces, which can crack the Peltier elements inside the TEC module. The crack caused by tangent forces will grow with time, resulting in increases of TEC resistance and finally stopping operating. Therefore, for all TEC modules, tangent forces should be avoided when using TEC modules. All ATE1-288 series TEC modules are sealed version, which have the edges between the two plates sealed. Sealed TEC modules can prevent moisture from getting into the Peltier elements, which can help achieve long service life and high stability.

Peltier modules can work with heat sink, TEC controller and thermistors to form different temperature control systems.

For technical data and more types of Peltier modules, please refer to:

http://www.analogtechnologies.com/tec-module.html

For more and various types of electronic products, please visit our homepage at:

http://www.analogtechnologies.com

Peltier Cooler ATE1-127 Series

ATE1-127 series Peltier cooler comes with 127 pairs of Peltier elements between the two flat ceramic plates. The maximum input voltage of this TEC module is 15.4V. The maximum current is selectable from 3A to 18A, resulting in different power ratings. This series TEC modules come with two different operating temperature ranges: one is from −60°C to 85°C and the other is from −60°C to 200°C. The latter has an part number with a suffix “H”, standing for high temperature, while the former doesn't have this suffix.

The TEC modules can be controlled by our TEC controller to precisely regulate the temperature of the target objects to a stable temperature range. There are sealed TEC modules and non-sealed TEC modules available. The sealed TEC modules have the edges be sealed, which blocks moisture to get into the Peltier elements. However, non-sealed TEC modules feature higher efficiency and maximum temperature difference between the two ceramic plates.

Peltier modules can work with heat sink, TEC controller and thermistors to form different temperature control systems.

For technical data and more types of Peltier modules, please refer to:

http://www.analogtechnologies.com/tec-module.html

For more and various types of electronic products, please visit our homepage at:

http://www.analogtechnologies.com/

Peltier Module ATE1-07 Series

Peltier module is also called TEC module, short for thermo-electric cooler. ATE1-07 series Peltier modules come with 7 pairs of Peltier elements inside the module. There are two flat ceramic plates on the both sides, which are used to be mounted onto other surfaces by inserting thermal conductive materials, such as thermal pad or thermal conductive paste.

This Peltier module is used to regulate the temperature for objects and stabilize the temperature in a certain temperature range. TEC modules are widely applied in the fields such as solid state lasers, optical components, and CCD’s, etc. The maximum input voltage is 0.8V and 0.9V, and the maximum temperature differences can be 61.5°C and 74°C between the two plates of TEC modules. TEC modules usually have two versions, sealed and non-sealed. The former seals the outer edge between the two ceramic plates, which the latter doesn't.

Peltier modules can work with heat sink, TEC controller and thermistors to control the temperature in some systems.

For technical data and more types of Peltier modules, please refer to:

http://www.analogtechnologies.com/tec-module.html

For more and various types of electronic products, please visit our homepage at:

http://www.analogtechnologies.com/

Digital Fan TEC Controller ATFC106D

ATFC106D is a digital fan/TEC controller, which is designed and used for driving and monitoring TEC and fan assemblies and can show the working parameters in real time on the PC. This TEC controller is an upgraded version of ATFC105D, the latter doesn't come with real-time status showing function.

This TEC controller assembly is to regulate the temperature of an enclosed chamber. It will maintain the temperature of the chamber within a certain temperature range. Once the temperature exceeds the safety windows, the TEC controller assembly will cut off the AC power switch by sending the relay control signal. The power supply voltage is 12V, and the maximum input current is 25A. This assembly includes a TEC controller, a fan controller, temperature controlled relay control output, and a digital display. There are fans on the hot side heat sinks and cold side heat sinks for heat dissipation.

Refer to the webpage and datasheet for more technical data of this digital fan TEC controller:

http://www.analogtechnologies.com/TEC_Controller_ATFC106D.html

More types of tec controllers can be found in our website, please visit us at:

http://www.analogtechnologies.com/tec-controller.html

For more and various types of electronic products, please visit our homepage at:

http://www.analogtechnologies.com