Thermoelectric Cooler Peltier Cooler ATE1-31

Peltier cooler ATE1-31 has 31 pairs of Peltier elements, with two ceramic plates and two lead wires of different colors. The maximum voltage is 3.9V, and the maximum current is variable due to the height of the Peltier elements. There are several models in this series.

For example, ATE1-31-1ASH, 31 represents 31 pairs of Peltier elements; 1A stands for the maximum current; S is for sealed between the two ceramic plates of the TEC; H means the TEC module has high operating temperature, up to 200°C. The maximum temperature difference the TEC modules can achieve is from 62°C to 75.5°C. All the TEC modules in this series is single stage TEC, if higher temperature difference is needed, two or multiple stages TECs are needed, you can contact us for customized TECs.

The photo below shows a TEC in this series. The red lead wire is positive and the negative is the black wire.

If you want to know more about this TEC module, please visit:

http://www.analogtechnologies.com/tec-module.html

Our TEC modules can be controlled well with our TEC controller, please check:

http://www.analogtechnologies.com/tec-controller.html

There are more products provided by our company, please check:

http://www.analogtechnologies.com/

Thermoelectric Cooler Peltier Cooler ATE1-17

ATE1-17 series of Peltier coolers come with 17 pairs of Peltier elements, with a maximum input voltage of 2.2V. There are two insulated lead wires, one is red for positive and the other is black for negative, as shown in the photo below.

The TEC module comes with two ceramic plates for easy mounting. The Peltier cooler can be soldered to the target object andheat sink, or mounted by using thermal conductive pad or epoxy. To achieve best cooling effect, soldering is recommended, but it is not convenient to remove it from the object. There are several models in this TEC module series, such as ATE1-17-1.9A and ATE1-17-3AS. For the former, 1.9A is the maximum current allowed to go through the TEC, and for the latter, it is 3A. In the part number of the latter, there is a "S" at the end, it stands for sealed between the two ceramic plates of the TEC. And the former is a non-sealed TEC modules.

If you want to know more about this TEC module, please visit:

http://www.analogtechnologies.com/tec-module.html

Our TEC modules can be controlled well with our TEC controller, please check:

http://www.analogtechnologies.com/tec-controller.html

There are more products provided by our company, please check:

http://www.analogtechnologies.com/

Thermoelectric Cooler Peltier Cooler ATE1-07

Peltier cooler ATE1-07 has 7 pairs of Peltier elements, with a maximum input voltage of 0.9V. The size of this series TEC modules is small, less than 10mm. There are two ceramic plates on the both side of the TEC module.

Take one TEC module as an example, ATE1-07-3AS, 1 refers to single stage TEC; 07 stands for 7 pairs of Peltier elements; 3A is the maximum current allowed to go through the TEC; S means sealed between the two ceramic plates of the TEC module, without this S in the part number, it is a non-sealed version. For moisture environment, sealed version is recommended, and for applications where high efficiency is needed, non-sealed version is then recommended. Besides 3A maximum current, there are three other currents for options, 0.8A, 1A, and 6A. The maximum temperature difference for 0.8A TEC module is 74°C, and for the TEC modules of other currents, it is 61.5°C.

If you want to know more about this TEC module, please visit:

http://www.analogtechnologies.com/tec-module.html

Our TEC modules can be controlled well with our TEC controller, please check:

http://www.analogtechnologies.com/tec-controller.html

There are more products provided by our company, please check:

http://www.analogtechnologies.com/

Thermoelectric Cooler Peltier Cooler ATE1-18

Thermoelectic cooler can also be called Peltier cooler or TEC module, which are often used for regulating the temperature of objects in applications such as solid state lasers, optical components, etc. This Peltier cooler ATE1-18 has two metalized surfaces on both the hot and cold side, which can be easily soldered. This TEC module has 18 Peltier elements with a maximum input voltage of 2.3V. This series of TEC modules have a wide temperature range, from −60°C to 200°C.

There are two models in this TEC module series, ATE1-18-R4A and ATE1-18-1R5A. Both of the two models are non-sealed. Non-sealed TEC module has higher efficiency and can achieve higher maximum temperature difference between the two ceramic plates of TEC modules, but needs to be used in dry environment. For ATE1-18-R4A, the maximum current is 0.44A, and the maximum temperature difference is 71.5°C. For ATE1-18-1R5A, the maximum current is 1.53A. The maximum temperature difference is 71°C.

If you want to know more about this TEC module, please visit:

http://www.analogtechnologies.com/tec-module.html

Our TEC modules can be controlled well with our TEC controller, please check:

http://www.analogtechnologies.com/tec-controller.html

There are more products provided by our company, please check:

http://www.analogtechnologies.com/

ATE1-TC-199 Series Thermoelectric Modules

ATE1-TC-199 series thermoelectric modules are low cost high performance TEC modules that are used for thermal cycling applications. This series TEC modules have two versions, ATE1-TC-199-13A and ATE1-TC-199-13AS. The former is non-sealed version and the latter is the sealed one. The non-sealed TEC module can achieve higher efficiency and higher maximum temperature difference between the two ceramic plates. The sealed TEC module can be used in moisture applications. The sealing material is silica gel.

The maximum input voltage of the TEC modules is 27.4V, and the maximum current allowed going through the TEC module is 13A. The maximum temperature difference is 72 Celsius Degree.

The thermal cycling TEC modules are superior to standard TEC modules since they have longer service life when suffering frequent heat changes, such as heating to cooling or cooling to heating.

TEC modules can be controlled by our TEC controllers for stable and efficient temperature regulating system or work with ourthermistors for accurate temperature sensing, please visit this webpage for more information:

http://www.analogtechnologies.com/tec-controller.html

ATI provides more thermal cycling TEC modules and standard TEC modules, for more technical data of TEC modules, please visit our webpage and datasheet:

http://www.analogtechnologies.com/tec-module.html

For more products of thermal system, please visit:

http://www.analogtechnologies.com/thermal_system_components.html

ATE1-TC-127 Series Thermoelectric Modules

ATE1-TC-127 series thermoelectric modules are thermal cycling TEC modules, which are designed for thermal cycling application. These thermal cycling TEC modules are better than standard TEC modules that cannot stand heat and cool impact. When standard TEC modules suffer frequent heat changes, the operational life of them will be largely reduced. However, it will not influence thermal cycling TEC modules much.

In this series, there are six TEC modules with different voltages and currents, thus different power ratings. The current can be 5.5A, 5.7A, 7.8A, 8.5A, and 12.1A, and the voltage can be 16.2V and 17.5V. The temperature difference that the TEC modules can attain is 72°C, 72.5°C and even 74.5°C. There are sealed version and non-sealed version. The former can be used in moisture environments and the latter can achieve higher efficiency and maximum temperature difference.

TEC modules can be controlled by our TEC controllers for stable and efficient temperature regulating system or work with ourthermistors for accurate temperature sensing, please visit this webpage for more information:

http://www.analogtechnologies.com/tec-controller.html

ATI provides more thermal cycling TEC modules and standard TEC modules, for more technical data of TEC modules, please visit our webpage and datasheet:

http://www.analogtechnologies.com/tec-module.html

For more products of thermal system, please visit:

http://www.analogtechnologies.com/thermal_system_components.html

ATE1-TC-70-15AS Thermoelectric Module

ATE1-TC-70-15AS is a thermal cycling thermoelectric module, which are designed for thermal cycling applications. StandardTEC modules will suffer operation life decrease when the TECs shift from heating to cooling or cooling to heating. Thermal cycling TEC modules, such as ATE1-TC-70-15AS, can bear the heat changes and the operational life will not be reduced.

As shown in the part number, there are 70 pairs of Peltier elements inside the two ceramic plates of this TEC module; the maximum current allowed for entering the TEC module is 15A; "S" indicates that this TEC module is sealed version, which can prevent moisture from getting into the Peltier elements inside the TECs. The maximum power supply voltage is 9.6V. The maximum temperature difference between the cold side and hot side is 72°C.

TEC modules can be controlled by our TEC controllers for stable and efficient temperature regulating system or work with ourthermistors for accurate temperature sensing, please visit this webpage for more information:

http://www.analogtechnologies.com/tec-controller.html

ATI provides more thermal cycling TEC modules and standard TEC modules, for more technical data of TEC modules, please visit our webpage and datasheet:

http://www.analogtechnologies.com/tec-module.html

For more products of thermal system, please visit:

http://www.analogtechnologies.com/thermal_system_components.html