ATEC24V10A1is a Peltier controller with high output voltage (24V) and high output current (10A), as shown in Figure 1. ATEC24V10A1Peltier controller is designed and produced to drive high power TECs (thermo-electric coolers). It has high efficiency(more than 98%) and high temperature stability (±0.01°C). This Peltier controller has a wide input voltage range, so based on the voltage signal, it can set the output current limit and the set-point temperature that can be programmed externally.
Figure 1. The physical photo of an actual ATEC24V10A1Peltier controller
The ATEC24V10A1 Peltier controller comes with a switch mode output stage. The switching frequency of thisPeltier controller can synchronize with external signal in order to eliminate any possible beating noise on power supply rails. There is a compensation network inside, which helpsachieve high temperature stability and highresponse speed. As the Peltier controller is packaged in a metal enclosure, it can avoid the interferences between the controller and other electronics.
If you want to know more about Peltier controller, please feel free to contact us.
Our web site is http://www.analogtechnologies.com/ATEC24V10A.html
没有评论:
发表评论